A little less shed. A lot more backyard.

SHED DEMOLITION & REMOVAL

Shed removal
in Bellevue, WA.

Shed Gone takes down old sheds all over Bellevue, from Lake Hills to Somerset, cedar, metal or resin, and leaves nothing behind but open lawn.

Sources checked October 10, 2026 · How we research

START HERE

Upload a photo of the shed.
Get a quote.

Show us the shed and the way out. Tell us what goes, and what stays.

No payment. No commitment.

Get a shed removal quote without a photo →
Want to shop around? See 6 other companies ↓
Yard cleared after shed removal by Way 2 HaulWooden shed before removal by Way 2 HaulOLD SHEDSPACE RECLAIMED
LESS SHED.More possibility.Drag the handle to see the difference ↔
SHED REMOVAL
Removal & photos: Way 2 Haul ↗
Reference photos · not a Shed Gone job · Camera angles vary

SHED REMOVAL IN BELLEVUE

We take it down.
We haul it away.

How it works ↗

Shed removal is all we do. Wood, metal or resin, falling apart or still standing, we take your Bellevue shed apart and leave the space clean.

  • Taking the shed apart: roof, walls, doors and floor
  • The stuff inside, if you want it gone too
  • Loading, haul-away and disposal, with metal and clean wood recycled where it’s accepted
  • The slab, gravel pad or footings, if you want them out
  • Sweeping and raking the spot clean

We check what Bellevue requires for your shed before any work starts, and any power to the shed must be disconnected by a licensed electrician before removal day. The local rules are below.

01

Send a photo.

Show us the shed and the way out, and add your Bellevue ZIP code. No payment, and it isn’t a booking.

02

Get our price.

We look at your photos and send our price, what it includes and the dates we have.

03

We haul it away.

We confirm a date, take the shed down, load every piece and leave the spot clean.

Get a shed removal quote ↗

PERMITS & DIY DISPOSAL

Doing it yourself, or just checking the rules?

Here’s what Bellevue asks for before a shed comes down, what city pickup will take, and where you can drop off the debris yourself.

Bellevue rules at a glance

Demolition permit

Not for most backyard sheds. Bellevue needs no demolition permit for a one-story detached shed of 200 sq ft or less. Larger sheds need a demolition permit.

City of Bellevue Development Services: Demolition Permits ↗Bellevue City Code 23.05.090: Permits required ↗

City pickup

No. Republic's bulky pickup covers appliances, furniture and mattresses, $132.59 an item. For demolition debris, the City points you to a rented Republic container or the Factoria station.

Republic Services: City of Bellevue Residential Rates 2026 (PDF) ↗City of Bellevue Utilities: Year-Round Recycling Guide for Unusual Items ↗

Haul it yourself

Factoria Recycling & Transfer Station (King County). Garbage $40.25 minimum (up to 320 lb), then $243.38 per ton. Clean wood $20.70 minimum, $129.38 per ton. Scrap metal recycling free. $25 unsecured-load fee. New fees start January 1, 2027.

3 drop-off options →

What it costs

Shed Gone: a price from your photos, with teardown, haul-away and cleanup included.

Others here: JC Junk Solutions lists $150–$250 for a small plastic or metal shed and $250–$500 for a medium wooden one. LoadUp shows $94–$1,559 in King County. Others quote per job.

JC Junk Solutions: Shed removal ↗LoadUp: Bellevue shed removal ↗

Do I need a permit?Bellevue demolition rules, utilities and property checks.

The requirements depend on the structure, the work and the property’s jurisdiction. These are the official starting points for checking your job. Confirm with the building office before teardown day. How shed demolition permits work ↗

01

Demolition permits and the 200 sq ft exemption

Bellevue's demolition permit covers taking down all or part of any permanent structure, a storage shed included. It isn't needed when the structure is already exempt from a building permit under City Code 23.05.090, which exempts one-story detached accessory structures such as tool and storage sheds of 200 square feet or less. A bigger shed needs a demolition permit, applied for online through MyBuildingPermit, with a demolition drawing, an erosion-control plan (a short form for small sites) and a water/sewer disconnection form. If the foundation comes out, the permit also covers clearing and grading.

City of Bellevue Development Services: Demolition Permits ↗Bellevue City Code 23.05.090: Permits required ↗

02

Fees and work in the street

The City doesn't post a flat demolition fee; use its Permit Fee Estimator or call the Development Services Permit Center at 425-452-4898. Any demolition work in the public right of way, such as capping a utility or setting up a construction entrance, needs a separate right-of-way permit.

City of Bellevue Development Services: Demolition Permits ↗

04

Wiring needs a City electrical permit

Bellevue issues its own electrical permits, and the City says adding or altering a branch circuit needs one. The page doesn't name removing a circuit to a shed, so ask Mechanical, Electrical and Plumbing Review at 425-452-6873 before the wire is cut.

City of Bellevue Development Services: Electrical Permits ↗

Can I dispose of it myself?City pickup rules, drop-off options and fees for shed debris.

Will Bellevue pick up shed debris?

No, not as regular or bulky pickup. Republic Services, Bellevue's contracted hauler, picks up bulky items such as appliances, furniture and mattresses for $132.59 each, and lumber or demolition debris isn't on that list. For construction and demolition debris, the City's guide says to rent a Republic container, with fees, or self-haul to the Factoria station. Scrap metal is the exception: it's included in Republic service, and larger pieces can be scheduled for pickup at 425-452-4762.

Republic Services: City of Bellevue Residential Rates 2026 (PDF) ↗City of Bellevue Utilities: Year-Round Recycling Guide for Unusual Items ↗

Drop-off and recycling options

If you’d rather haul it yourself, sort the load first: clean wood, metal, roofing, concrete and household contents often go to different places or cost different amounts. Call ahead before hiring a trailer. What can be recycled ↗

Factoria Recycling & Transfer Station (King County)

13800 SE 32nd St, Bellevue, WA 98005

A County transfer station for people who live or do business in King County's service area (not Seattle or Milton). It takes self-hauled construction and demolition debris as garbage, except from dump trucks or dump trailers unless debris is under 20% of the load. Clean wood, scrap metal and cardboard can't go in the garbage here and must be sorted into the recycling areas.

Fees: Garbage $40.25 minimum (up to 320 lb), then $243.38 per ton. Clean wood $20.70 minimum, $129.38 per ton. Scrap metal recycling free. $25 unsecured-load fee. New fees start January 1, 2027.

Before you go: Open weekdays 6:30 a.m. to 4 p.m. and weekends 8:30 a.m. to 5:30 p.m. per the County fact sheet. Keep pieces 8 feet or shorter and tarp the load. Questions: 206-477-4466.

King County Solid Waste: Factoria Recycling & Transfer Station ↗King County Solid Waste: Factoria fact sheet (PDF) ↗King County Solid Waste: Disposal restrictions ↗King County Solid Waste: Disposal fees ↗

Houghton Recycling & Transfer Station (King County)

11724 NE 60th St, Kirkland, WA 98033

A County transfer station for King County's service area. It takes self-hauled garbage, with the same County rules for construction and demolition debris: none from dump trucks or dump trailers unless under 20% of the load, and nothing over 8 feet. Only cardboard must be sorted out for recycling here; clean wood recycling is offered at other County stations instead.

Fees: Garbage $40.25 minimum (up to 320 lb), then $243.38 per ton. $25 unsecured-load fee. New fees start January 1, 2027.

Before you go: Check hours on the County's Houghton page before you go. Questions: 206-477-4466.

King County Solid Waste: Houghton Recycling & Transfer Station ↗King County Solid Waste: Houghton fact sheet (PDF) ↗King County Solid Waste: Disposal restrictions ↗King County Solid Waste: Disposal fees ↗

Republic Services Recycling Drop-Off Center

1600 127th Ave NE, Bellevue, WA 98005

Republic's recycling drop-off takes all scrap metal except greasy auto parts, which suits a cut-up metal shed. It is not a place for wood or mixed debris, and bulky items aren't accepted for drop-off.

Fees: Scrap metal: no fee.

Before you go: Open Monday to Saturday, 10 a.m. to 4 p.m., per Republic's 2026 rate sheet. Call 425-452-4762 to confirm before you go.

City of Bellevue Utilities: Year-Round Recycling Guide for Unusual Items ↗Republic Services: City of Bellevue Residential Rates 2026 (PDF) ↗

What else should I know in Bellevue?Local notes, and the photos that set the price.

Who may haul shed debris: Republic holds the city contract, and no code limit was found

Bellevue contracts with Republic Services for garbage, recycling and compost. For construction and demolition debris, the City's guide says to rent a container from Republic or take loads to the Factoria transfer station. Bellevue's solid waste code (Chapter 9.26) covers the county waste plan, recyclables and yard waste, and says nothing about who may haul demolition debris or set drop boxes. The contract itself isn't posted online. So no published rule bars a homeowner or a removal crew from hauling shed debris, but the City hasn't said so outright either.

City of Bellevue Utilities: Solid Waste for Residents ↗City of Bellevue Utilities: Year-Round Recycling Guide for Unusual Items ↗Bellevue City Code Chapter 9.26: Solid Waste ↗

King County bans recyclable building debris from the landfill

County code bans clean wood, metal, cardboard, concrete, bricks, asphalt paving and new gypsum scrap from the landfill. Mixed debris that still holds those materials must go to a county-designated C&D facility; sorted wood and metal can go to any recycler. Painted or treated wood isn't recyclable. First violations draw a $100 fine, then $500.

King County Solid Waste: C&D materials ↗King County Solid Waste: Designated C&D facilities ↗

Republic picks up scrap metal at no extra charge

Bellevue's 2026 Republic rate sheet lists scrap metal as included in residential service. Clean metal goes in the recycling cart, and you can call to schedule pickup of larger pieces or take them to Republic's drop-off on 127th Avenue NE.

Republic Services: City of Bellevue Residential Rates 2026 (PDF) ↗

Photos that explain the job.

  • The whole shed, with the roof, doors and rough dimensions
  • What it sits on: slab, gravel, pavers, skids or blocks
  • The route out: gates, steps, slopes and the narrowest gap
  • Anything stored inside, and any wiring, lights or a water line

Tell us whether the shed has power. A licensed electrician should disconnect and make the circuit safe before teardown. Say which items stay, and whether the slab or footings go too.

Get a shed removal quote ↗
What will it cost?How shed removal is priced, and what other local companies publish.

Shed Gone

Priced from your photos

A small empty resin shed and a large timber shed on a concrete slab are different jobs, so we don’t publish one number. The price depends on the shed’s size and material, what’s inside, what it sits on, and the route from the shed to the truck.

Start a quote from photos ↗

Other companies’ advertised prices

JC Junk Solutions publishes shed prices: $150 to $250 for a small plastic or metal shed and $250 to $500 for a medium wooden one, with large wooden sheds quoted. LoadUp shows $94 to $1,559 for a shed in King County, with the exact price when you book. College HUNKS shows $99 to $699 for junk loads, which isn't a shed price. Busby, Trailer Trash and Northwest Labor Industries quote per job.

JC Junk Solutions ↗

From $150

The shed page lists $150 to $250 for a small plastic or metal shed and $250 to $500 for a medium wood shed. Large wood sheds are quoted.

LoadUp ↗

$94–$1,559

The shed page gives a $94 to $1,559 range for King County, lower if the shed is already taken apart. The exact price is shown when you book online.

These are the other companies’ own advertised prices, checked October 10, 2026. They are not our prices and not a citywide average.

When you compare quotes, ask for one written total that covers dismantling, hauling, disposal fees and cleanup, and ask whether the contents, the floor and the slab or footings are included. What shed removal costs ↗

Want to shop around in Bellevue, WA?

6 other companies

Shed removal is what we do, and we think we’re the best at it. Still, it’s your shed and your yard. If you’d like to compare, here are other companies whose own websites advertise shed removal in Bellevue. Give them a call. We’re confident you’ll come back to us.

Removal company

Busby Junk Removal

Family-owned junk removal company, in business since 2005, with a shed demolition and debris removal service.

Ask for a priceJob-specific quote
Service & price details

King, Pierce and Snohomish counties

It says it is headquartered on the Eastside with a staffed operations site, handles all lifting, loading and hauling, and sweeps the work area when done. You can text a photo for a quick quote.

No shed price is published. The crew gives a final estimate on site, and booking online saves $10.

Visit company ↗Call 425-279-5937

Junk removal franchise

College HUNKS Hauling Junk

Junk removal franchise that lists storage sheds among the items it hauls away.

Ask for a priceGeneral junk-load pricing
Service & price details

Seattle area, from 4229 W. Marginal Way SW, Seattle

Its local page doesn't describe tear-down, slab work or what's included for a shed. Ask whether the crew takes the shed apart or only hauls the pieces.

The local page shows example junk-removal prices of $99 to $699, based on truckload size. No shed price is published.

Visit company ↗Call 206-201-0541

Removal company

JC Junk Solutions

Locally owned junk removal company that dismantles small to medium wood, metal and plastic sheds and hauls away all the debris.

From $150Published shed price
Service & price details

Seattle metro across King, Pierce and Snohomish counties, including Seattle, Tacoma, Bellevue and Kent

It can remove the shed's contents too, sweeps the area when done, and recycles wood and metal when possible. It says very large, wired or structurally integrated sheds may need specialty demolition.

The shed page lists $150 to $250 for a small plastic or metal shed and $250 to $500 for a medium wood shed. Large wood sheds are quoted.

Visit company ↗Call 206-745-2293
See all 6 companiesExpand +

National booking platform

LoadUp

Online booking platform that connects you with local independent haulers for shed pickup and disposal.

$94–$1,559Published shed price
Service & price details

Bellevue and the rest of King County

Its shed page says some light disassembly may be needed depending on the foundation, structure and condition, and asks for photos. Removal covers heavy lifting, loading, transport and disposal.

The shed page gives a $94 to $1,559 range for King County, lower if the shed is already taken apart. The exact price is shown when you book online.

Visit company ↗Call (844) 239-7711

Removal company

Northwest Labor Industries

Junk removal and demolition company that lists sheds and outbuildings among the structures it tears down and hauls away.

Ask for a priceJob-specific quote
Service & price details

Seattle and nearby King and Snohomish County cities, from 6910 Roosevelt Way NE, Seattle

Its demolition page says cleanup is included in the price. It doesn't describe slab work or shed contents.

No shed price is published. It gives free demolition quotes.

Visit company ↗Call (206) 388-6135

Removal company

Trailer Trash Junk Removal

Eastside junk removal company that says it can demo and haul away sheds, playhouses, carports, fences and decks.

Ask for a priceJob-specific quote
Service & price details

Kirkland, the Eastside and other King County cities

Office at 14327 124th Ave NE. Its pages don't describe what a shed job includes, such as slab removal.

No shed price is published.

Visit company ↗Call 425-236-4787

Independent companies, not affiliated with Shed Gone. Listed alphabetically. Prices are their own advertised prices. How we choose listings

COMMON QUESTIONS

A few more answers.

How much does shed removal cost in Bellevue?

Shed Gone prices each shed from your photos, with teardown, haul-away and cleanup included. Of other companies serving Bellevue, JC Junk Solutions lists $150 to $250 for a small plastic or metal shed and $250 to $500 for a medium wooden shed. LoadUp shows $94 to $1,559 for a shed in King County. College HUNKS shows $99 to $699 for junk loads, not a shed price. Busby, Trailer Trash and Northwest Labor Industries quote per job.

JC Junk Solutions: Shed removal ↗LoadUp: Bellevue shed removal ↗College HUNKS Hauling Junk: Bellevue, WA ↗Busby Junk Removal: Shed demolition and removal ↗

Can I haul the pieces to Factoria myself?

Yes, from a car, pickup or regular trailer. King County doesn't take demolition debris from dump trucks or dump trailers unless it's under 20% of the load. Pieces must be 8 feet long or less, and clean wood and scrap metal go in the recycling areas. Garbage costs $40.25 for up to 320 pounds, then $243.38 a ton; new fees start January 1, 2027.

King County Solid Waste: Disposal restrictions ↗King County Solid Waste: Disposal fees ↗City of Bellevue Utilities: Year-Round Recycling Guide for Unusual Items ↗

Where does a metal shed go?

Republic's Bellevue drop-off at 1600 127th Ave NE takes all scrap metal except greasy auto parts at no fee. Factoria also recycles metal free if items are at least half metal, up to 8 feet and 200 pounds.

City of Bellevue Utilities: Year-Round Recycling Guide for Unusual Items ↗

What about old painted or treated lumber?

Painted or treated wood can't be recycled. County stations take treated wood from households in pieces 8 feet or shorter, but not from businesses. Only clean, unpainted lumber goes to the wood recycling bins, at $20.70 minimum or $129.38 a ton.

King County Solid Waste: Disposal restrictions ↗King County Solid Waste: C&D materials ↗King County Solid Waste: Disposal fees ↗

Can a concrete pad go to the transfer station?

Not in big chunks. County stations turn away items larger than 2 by 2 by 2 feet that weigh over 200 pounds, such as concrete blocks, unless approved through Waste Clearance (206-477-4466). Concrete is also on the County's list of debris banned from the landfill, so it belongs at a recycler.

King County Solid Waste: Disposal restrictions ↗King County Solid Waste: C&D materials ↗

What if the shed has asbestos siding or roofing?

Friable asbestos must come out before demolition. Nonfriable material can stay in place if it isn't disturbed, then goes in a container labeled "nonfriable asbestos waste." King County stations won't take any asbestos waste without Waste Clearance approval. The agency strongly encourages hiring a certified abatement contractor.

Puget Sound Clean Air Agency: Homeowner Demolition ↗King County Solid Waste: Disposal restrictions ↗

Sources behind this guide

Reviewed October 10, 2026 using company websites, municipal guidance and facility rules. Prices and published policies can change; older source dates are identified where relevant. We have not called every business or facility.

See all 26 research sources

SHED DEMOLITION & REMOVAL

More backyard.
Less baggage.

Start with the shed and the way out. Add a few photos and tell us what should stay.

START HERE

Upload a photo of the shed.
Get a quote.

Show us the shed and the way out. Tell us what goes, and what stays.

No payment. No commitment.

Get a shed removal quote without a photo →
Local service information →